QIN-PCR200-DTH pneumatic crawler drilling rig is named "Climb King" in Africa mining site.4/30/2021
Whether you're using DTH or Top Hammer Pneumatic Crawler Drilling Rig (eg, Ingersoll Rand CM351, EPIROC AirRoc D45/D50, Furukawa PCR200, YUAN-PCR200-PRO, QIN-PCR200-DTH, HAN-D50-DTH...), you're probably being annoyed by the dust while the rig is drilling, which is damaging and irreversible to the Driller's respiratory system.
But based on the working principle of pneumatic crawler drilling rig and the installation principle of dust collector, if you make a wrong choice, it will bring you huge economic losses. First of all, you must know the basic working principle of the pneumatic crawler drilling rig. The rig is driven by the portable screw air compressor, in order to carry out various actions, traveling, drilling, if it is losing the air compressor, the rig is unable to do anything. Second, pneumatic crawler drill is mounted with dust collector which has filters and pulse, the air compressor must share the air to the pneumatic crawler drilling rig, that is bound to affect the air supply, that is, 100% of the original air supply to the pneumatic crawler drilling rig, but now with a dust catcher, only 70% of the air supply to the drilling rig, it is bound to affect drilling efficiency, improve the drilling cost. Third, installing a dust collector with pulse and filter, but also need to add battery on the dust collector, in order to ensure the normal operation of the pulse. This undoubtedly presents a huge problem to the work site without power supply. So, your DTH or Top hammer pneumatic crawler rock drilling rig can not be installed with dust collector? The answer, of course, is no. DRILL PANGOLIN® has been developing and manufacturing DTH pneumatic crawler drilling rig & Top hammer pneumatic crawler rock drill for more than 10 years and has the right solutions. That is to install the Water mist flushing system with pressurised tank on the pneumatic crawler drilling rig, which uses the source of life - water, to occupy 2% of the air from the air compressor. Water spray is applied to the dust during drilling process, so as to achieve the ultimate purpose of dust removal. While this sounds simple enough, but there are many technical difficulties are involved. It is recommended that users do not privately modify, in order to avoid the loss of some parts of the pneumatic drill.
The user's quarry is located in Central Africa and DRILL Pangolin is providing drilling technology to help improve its blasting efficiency.
The granite found in African quarries is of the highest quality. The quarry plans to mine about 4 million meters of rock a year. The Rock hardness of this quarry is medium hardness f=8-10. After repeated tests, the quarry decided to adopt the technology of inclined hole with a diameter of 140mm and an angle of 30 degrees from the vertical direction, which can make the steps stable and the resistance lines uniform, reduce bulk rate and residue. The African user is an expert in the industry and demands that the rotation toqure of DTH crawler drilling rig must reach 4200 N.m. After visiting the drilling site of QIN-PCR200-DTH pneumatic crawler drilling rig in Africa,they are satisfied to the quality & service of DRILL PANGOLIN, but QIN-PCR200-DTH crawler drilling is pneumatic type, the biggest rotation torque is 3600 N.m, unable to meet customer's requirements. To help our African customer meet the drilling target for the year, we recommend KHITAN-910-DTH hydraulic crawler drilling rig and equipped with DRILL Pangolin 750 portable air compressor which is powered by liutechh. KHITAN-910-DTH hydraulic crawler drilling rig's rotary motor which are powered by USA EATON, the biggest rotary toqure is up to 4200 N.m. At the same time, compared with QIN-PCR200-DTH pneumatic crawler drilling rig, it is more convenient traveling without air compressor and faster to swift the site because it is an engine-driven rig rather than an air-driven rig with air compressor. DRILL PANGOLIN pneumatic rotary head assembly is the best choice to replace the old rotary head of Furukawa PCR200-DTH & Atlas Copco AirRoc D45 DTH pneumatic crawler drilling rig.
DRILL PANGOLIN new color system is started in 2020.
|